PREPARATION
South Bend Tools
South Bend Tools
-14-
For Machines Mfd. Since 7/19
Model SB1065F–SB1071F
P R E P A R A T I O N
Preparation Overview Required for Setup
To complete the preparation process, you will
need the following items:
For Lifting and Moving
• A forklift or other power lifting device rated
for at least 25% more than the shipping
weight of the lathe (see Product Data
Sheet).
• Lifting straps, each rated for at least 25%
more than the shipping weight of the lathe.
• Guide rods for steading the load when lifting.
• Two other people for assistance when moving
machine.
• Hardwood blocks (refer to Page 19).
• Two solid-steel bar stock that are 2
1
⁄
2
" dia x
4' long to serve as lifting bars.
For Power Connection
• A power source that meets the minimum
circuit requirements for this machine (review
the Power Supply Requirements section
on the next Page for details).
• An electrician or qualified service personnel
to ensure a safe and code-compliant
connection to the power source.
For Cleaning & Assembly
• Precision level 12"
• Cotton rags
• Cleaner/Degreaser (refer to Page 17)
• Quality metal protectant oil
• Safety glasses for each person
• Basic hand tools
• Floor mounting hardware (refer to Page 20)
The purpose of the preparation section is to help
you prepare your machine for operation. The list
below outlines this basic process. Specific steps
for each of these points will be covered in detail
later in this section.
The typical preparation process is as follows:
1.
Unpack lathe and inventory contents of box/
crate.
2.
Clean lathe and its components.
3.
Prepare location where lathe will be installed.
4.
Move lathe to the operation location.
5.
Level lathe and either bolt it to the floor or
place it on mounts.
6.
Assemble loose components and make any
necessary adjustments or inspections to
ensure lathe is ready for operation.
7.
Lubricate lathe and verify oil levels are full.
8.
Connect lathe to power source.
9.
Test run lathe to make sure it functions
properly.
10.
Prepare lathe for full operation.
Summary of Contents for Oil Country Series
Page 65: ...South Bend Tools...
Page 66: ......
