Sourcetronic ST500 004G1, User Manual, Page: 128 / 180

Chapter 5 Function parameter
122
Ch
ap
ter 5
17 Contactor abnormal 51 Initial position error
18 Current detection abnormal - COF communication failure
19 Motor auto tuning abnormal
y1.03 Frequency of the third fault Frequency of the last (most recent) fault
●
y1.04 Current of the third fault Current of the last (most recent) fault
●
y1.05 Bus voltage of the third fault Bus voltage of the last (most recent) fault
●
y1.06
Input terminal status of the third
fault
Input terminal status of the last (most recent)
fault, the order is:
When the input terminal is ON, the
corresponding binary bits is 1, OFF is 0, all DI
status is converted to the decimal number for
display.
●
y1.07
Output terminal status of the
third fault
Output terminal status of the last (most
recent) fault, the order is:
When the output terminal is ON, the
corresponding binary bits is 1, OFF is 0, all
DI status is converted to the decimal number
for display.
●
y1.08 Reserved
y1.09 Power-on time of the third fault Current power-on time at the last fault
●
y1.10 Running time of the third fault Current running time at the last fault
●
y1.11 to
y1.12
Reserve
y1.13 Frequency of the second fault Frequency of the second last fault
●
y1.14 Current of the second fault Current of the second last fault
●
y1.15 Bus voltage of the second fault Bus voltage of the second last fault
●
y1.16
Input terminal status of the
second fault
Input terminal status of the second last fault,
the order is:
When the input terminal is ON, the
corresponding binary bits is 1, OFF is 0, all
DI status is converted to the decimal number
for display.
●
y1.17
Output terminal status of the
second fault
Output terminal status of the second last
fault, the order is:
When the output terminal is ON, the
corresponding binary bits is 1, OFF is 0, all
DI status is converted to the decimal number
for display.
●
y1.18 Reserved
y1.19
Power-on time of the second
fault Current power-on time at the second last fault
●
BIT9 BIT8 BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1 BIT0
DI1 DI2 DI3 DI4 DI5 DI6 DI7 DI8 DI9 DI0
BIT9 BIT8 BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1 BIT0
DI1 DI2 DI3 DI4 DI5 DI6 DI7 DI8 DI9 DI0
BIT4 BIT3 BIT2 BIT1 BIT0
SPB REL1 Reserve
SPA
REL2
BIT4 BIT3 BIT2 BIT1 BIT0
SPB REL1
Reserve
SPA
REL2