Sourcetronic ST2826, Operation Manual

Page: 55 / 145

ST2826 Operation manual Ver1.0
◇
45
4.2<File management> page
In this chapter, the information about save and load of ST2826 is introduced.
Symbol
：
E: is the abbreviation of External
，
which means the external storage
，
as
：
U disk.
I: is the abbreviation of Internal
，
which means the internal storage
，
that is internal Flash.
4.2.1Introduction of save/load function
Save and function
Figure 0-1
Save Load available? Function
Type Format
Configuration save
（
Internal Flash
）
*.STA Yes
Save the configuration
status of ST2826 to
internal Flash.
Configuration save
（
External U disk
）
*.STA Yes Save the configuration
status of ST2826 to
internal U disk.
Data save
（
External U
disk
）
*.CSV No Save the test result to
U disk.
Screen save
（
External
U disk
）
*.BMP No Save the screen picture
of ST2826 to U disk.
4.2.2Folder /structure in U disk
It is suggested that user should build a file and folder
，
shown as figure 4-2. if user wants to save the
file to the new folder, enter the folder firstly then operate.
Figure 0-2 Folder in U disk
Folder The Max. file Description
CSV 999
Include the test result such as
*.CSV file.
STA 999 Include the configuration
information, such as *.STA file.
BMP 20 Include the serene picture as
*.BMP file.
Note : The folder of CSV
，
STA and BMP can be valid when U disk is connected to ST2826.