Sourcetronic ST2826, Operation Manual

Page: 46 / 145

ST2826 Operation manual Ver1.0
◇
36
Figure 3-11
ST2826 can test 10 frequency
，
level or bias voltage. The following sweep parameters can be
set on <List sweep setting>.

（
Mode
）

（
[Hz], level [V], level [I], bias [V], bias [I]
）

(sweep point)
 ( LMT )

（
Hi limit
，
Lo limit
）
3.7.1 Mode
Same as that on <List sweep display>.
3.7.2 Optional item
The sweep parameter can be
：
[Hz], level voltage mode [V], level current mode [I], bias
voltage mode[V], bias current mode[I].
Step
：
1) Move cursor to the bottom line in mode
，
the following softkeys are displayed
：
■ FREQ [Hz]
■ LEVEL [V]
■ LEVEL [A]
■ BIAS [V]
■ BIAS [A]
2) Press any softkey to select the parameter.
3.7.3 Sweep parameter setting
Move cursor to each parameter to set
：
on
（
HZ
）、
LMT
、
Hi limit and Lo limit, use
numeric key to input data
3.7.4 File
Refer to 4.2<File management>.