Sourcetronic ST2826, Operation Manual

Page: 123 / 145

ST2826 Operation manual Ver1.0
◇
113
query syntax
：
CORRection:SPOT<n>:LOAD:STANdard?
return
：
<NR3>,<NR3><NL^END>
:USE is used to set the channel number for multi-channel. Char ‗?‘ can be used to query the
used channel number.
command syntax
：
CORRection:USE <channel number>
<channel number>:the channel number from 1 to 127(NR1, NR2 or NR3 format).
e.g.
：
WrtCmd(―CORR:USE 10‖) ;set the channel number to 10
query syntax
：
CORRection:USE?
return
：
<channel number><NL^END>
:USE:DATA? is used to query the test data of the open/short/load correction for the particular
frequency point 1,2 or 3.
query syntax
：
CORRection:USE:DATA? <channel number>
<channel number>:1 to 127 (NR1 format)
return
：
<open1 A>,<open1 B>,<short1 A>,<short1 B>,<load1 A>,<load1 B>,
<open2 A>,<open2 B>,<short2 A>,<short2 B>,<load2 A>,<load2 B>,
<open3 A>,<open3 B>,<short3 A>,<short3 B>,<load3 A>,<load3 B>,
<open1/2/3 A>:NR3 format, the open correction data of the main parameter for
frequency point 1/2/3.
<open1/2/3 B>:NR3 format, the open correction data of the secondary parameter
for frequency point 1/2/3.
<short1/2/3 A>:NR3 format, the short correction data of the main parameter for
frequency point 1/2/3.
<short1/2/3 B>:NR3 format, the short correction data of the secondary parameter
for frequency point 1/2/3.
<load1/2/3 A>:NR3 format, the load correction data of the main parameter for
frequency point 1/2/3.
<load1/2/3 B>:NR3 format, the load correction data of the secondary parameter for
frequency point 1/2/3.
8.1.15COMParator subsystem command set
COMParator subsystem command set is used to set the BIN comparator, including setting the
compator ON/OFF, setting the limit list.
Command hierarchical chart: