ST2516 Series Operation Manual
38
7)
SCIP Command Reference
1. Data Conventions of This Manual
NR1
：
integer, for example:123
NR2
：
fixed number, for example: 12.3
NR3
：
floating number, for example: 12.3E+5
NL
：
CR character
，
integer: 10
^END
：
EOI (end) signal of IEEE-488 bus.
7.1
ST2516 Subsystem Commands
●DISPlay
●TRIGger
●
COMParator
●APERture
●SYSTem
●FUNCtion
●FET
Ch?
●
TEMPerature
●STATistical
●
BIN
7.1.1
DISPlay Subsystem Commands
DISPlay subsystem commands are mainly used to set the instrument display page.
The :DISPlay? query returns to the current page.
Command Tree:
The :PAGE command sets the display page.
The DISPlay:PAGE? qurey returns to the current page.
Command Syntax: DISPlay:PAGE <page name>
Functions of <page name> are as follows
：
MEASurement
Set the display page to the basic measurement.
COMPare
Set the display page to compare.
BIN
Set the display page to bin.
MSETup
Set the display page to measurement setup.
BSETup
Set the display page to bin setup.
