ST2516 Series Operation Manual
5
The color and arrow of the test cable should correspond to that of socket on panel, thus to
avoid abnormal measurement.
8)
[TRIGGER]
When the trigger mode is set as MANU (manual), pressing this key can trigger the
instrument manually.
9)
[ENTER]
Press this key to terminate and store input data.
10)
Universal Arrow Keys
There are four arrow keys: up, down, left and right arrow keys.
11)
Trademark and Model
Show instrument trademark and model.
12)
POWER
It is the power switch.
2.2
Introduction to Rear Panel
Figure 2-2 shows the rear panel of ST2516.
1
2
3
4
5
6
DEVICE
HANDLER
RS-232C
TEMP.INPUT
RATING
FUSE
~
T2AL
110V/60Hz
~
220V/50Hz
T1AL
RS-232C
S/N:
R6-513-00003
7
Figure 2-2 Rear Panel
1)
RS232C Serial Interface
It realizes serial communication of the instrument with PC
.
2)
TEMP.INPUT
There are two kinds of temperature signal input: Pt500 and Analog Input.
3)
Fuse socket and Power Socket
Fuse will be placed in this socket to protect the instrument; be used to input AC power.
