12
Keyboard
—character
Keyboard
—calendar setting
3.2 The output command
3.2.1 Start
1. Use START to control the output, long press can generate long pulse beeper.
2. Use foot switch to control the output, there are 5 modes, the mode can be revised in parameter
setting
Edge_U: Rising edge trigger
Edge_D: Falling edge trigger
Level:
Level trigger
Hold:
Hold the switch, it means output
3.2.2 Stop
1. Use STOP to control the output, long press to generate the long pulse beeper. When instrument is in
output status, press STOP to stop the output, and when the STOP key is pressed, instrument will cut the
internal relay to cut off the current path.
2. Use foot switch to stop the output.
Edge_U: Rising edge cut
Edge_D: Falling edge cut
Level:
Level cut
Hold:
Hold the switch, it means cut
17:23:45
