Version 5.2
Sourcefire 3D System User Guide
256
Inserting and Removing 8000 Series Modules
Module Slots on the 8000 Series Appliances
Appendix C
After you insert the modules into your appliance, see the following sections for
more information on using the modules:
•
For information on configuring the sensing interfaces, see
•
For information on using the stacking module, see
81xx Family
The 81xx Family appliances can use the modules in the following slots:
Stacking Configuration Considerations
Configure the modules as follows for stacked devices:
•
Install NetMods on the primary device only.
•
Install one stacking module on the primary device and one stacking module
on the secondary device.
82xx Family
The 82xx Family appliances can use the modules in the following slots:
82xx Family Primary Device
1
2
3 S
Slots 1-3: NetMods
Slot S: Stacking module
1
2
3
S
4
5
6
7
S
S
Slots 1-7: NetMods
Slot S: Stacking modules
