9
ENGLISH
ZEPHIRO 1000ST HAZE User manual
7.2. 3-Pin vs 5-Pin DMX cables
DMX connection protocols used by controllers and fixtures manufacturers are not stan-
dardized around the world. However, two are the most common standards: 5-Pin XLR
and 3-Pin XLR system. If you wish to connect the unit to a 5-Pin XLR input fixture, you
need to use an adapter-cable or make it by yourself.
Following the wiring correspondence between 3-Pin and 5-Pin plug and socket stan-
dards
5-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
8. CONTROL PANEL
ZEPHIRO 1000ST HAZE is equipped with a Control Panel consisting of an LCD display (2
Row X 8 Characters) and 6 buttons:
1. FUNCTION:
This button allows to scroll all the device Control Parameters
2. UP
:
Value adjustment Upward
3. DOWN
:
Value adjustment Downward
4. TIMER:
Starts the timer controlled functioning
5. VOLUME:
Start and Stop the output of constant Haze quantity
6. MANUAL:
Press
and hold for Manual Haze Output. When the button is released,
