7
ENGLISH
ZEPHIRO 100 BUBBLE User manual
4. Fan
5. Screw Knob
6. Bubble Wheel
7. Tank
8. Bubble Wand
9. Carrying Handle
10. Mounting Bracket
5. SETTING UP
f
ZEPHIRO 100 BUBBLE can be installed in high places (with clamps or couplers, not
included), or placed on the ground.
f
Keep ZEPHIRO 100 BUBBLE in horizontal position, do not tilt or flip. Before connect-
ing this unit to mains, fill in the tank with fluid. Always use water-based bubble fluid
for further information) .
f
Before connecting to power, check whether mains voltage is suitable for the unit or
not.
f
Power cord should be plugged into a grounded electrical outlet. Once connected,
turn ON the bubble machine and using the wireless controller it will start the bub-
bles emission.
6. MAINS CONNECTIONS
Connect the device to the mains with the supplied power cable. Please note that power
voltage and frequency are the same as the marked voltage and frequency of device
when connecting power.
Wire correspondence is as follow:
Cable (EU)
Pin
International
Brown
Live
L
Blue
Neutral
N
Yellow/Green
Earth
The earth must to be connected! Pay attention to safety! Before taking into
operation for the first time, the installation has to be approved by an expert
