DE2-EAMSAA100 0519 Pg. 1
1.800.338.7337 / www.soundoffsignal.com
DE2-EAMSAA300 A300 SIREN
IMPORTANT NOTICE TO INSTALLER:
Make sure to read and understand all
instructions and warnings before proceeding
with the installation of this product. Ensure
the manual and all warning cards are
delivered to the end user of this equipment.
TECHNICAL SPECIFICATIONS
Overall Dimensions:
1.8” H x 5.7”W x 6.3”D
Input Voltage:
10 - 16Vdc (negative ground)
Operating Temperature:
-30°C to +65°C
Siren
Operating Current
8 Amps @ 13.6 VDC
(100W Speaker)
Standby Current:
<35mA
Output Voltage:
Max 100W @ 12VDC
Lightning 1:
10A Maximum
Lightning 2:
10A Maximum
!
WARNING
Sirens produce loud sounds that
may damage hearing:
- Roll up windows.
- Wear hearing protection.
- use only for emergency response.
- Avoid exposure to siren sound
outside of vehicle.
Introduction
A wide range of features comes standard
with Armada
®
A300 series siren. Included
are four basic siren tones: Wail, Yelp, Hi-Lo
and PHSR. PA, manual and air horn sound
with siren override.
The Armada A300 siren includes a
permanent noise-canceling microphone that
produces high quality voice reproduction
without feedback squeal, and the
microphone’s push-to-talk switch will
override any siren tone for instant PA use.
This series of sirens can provide 100 watt
output and will meet or exceed SAE J1849
and Class A requirements for sound when
paired with an Armada high-power speaker.
Features
•High reliability with durable switching
•External PA gain control
•Full featured siren in a compact package
•Built-in noise-cancelling microphone
•Easily accessible fuse protection
•Meets Class A sound output requirements
•Two level Lighting Controls
•HIGH CURRENT interconnects must be properly terminated. Poor crimp quality can cause heat
build-up and fire. Follow crimp connector manufacturer instructions.
•DO NOT install this product or route any wires in the Air Bag Deployment Zone. Refer to vehicle
Owner’s Manual for deployment zones.
•Do NOT use system to disconnect headlights, brake lights or other safety equipment.
•Unit may become hot to touch during normal operation.
•Failure to properly install connectors, fuses or wiring may cause vehicle failure or fire.
•Installation must only be performed by trained technician. Installer must determine vehicle wiring
configuration and proper integration of system.
•Use proper wire gauge. All power wires connecting to positive (+) or negative (-) battery terminal
or local chassis ground (-) must be sized to supply at least 125% of max. current and properly fused at
power source.
•Install protective grommets when routing wire through firewall or metal.
WARNING
NOTICE:
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.
Improper use or installation may void warranty coverage. To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at
www.soundoffsignal.com/sales-support
. If you have questions regarding this product, contact
Technical Services
, Monday - Friday, 8 a.m. to 5 p.m. or after hours 5 p.m. to 8 p.m. EST
at
1.800338.7337
(press #4 to skip the automated message). Questions or comments that do not require immediate attention may be emailed to
SUPERIOR CUSTOMER RELATIONSHIPS. SMARTLY DESIGNED LIGHTING & ELECTRONIC SOLUTIONS.
WARNING
!
Do not install this product or route its wires in
the air bag deployment area.
Doing so may cause damage to or reduce
effectiveness of the air bag, or create projectile
that could cause serious injury or death.
To determine air bag deployment area refer to
vehicle manufacturer's manual.
