EN-6
EN-5
Radio
reception
1
.
Slide
the
FUNCTION
selector
to
AM
or
FM
.
2
.
Rotate
the
TUNING
control
to
find
the
desired
stations
.
3
.
When
you
have
finished
listening
,
slide the
FUNCTION
selector
to
the
other
position
or
shut
the
power
off
.
NOTE
:
If
the
BAND
selector
is
set
to
the
FM
stereo
station
,
the
FM
stereo
LED
indicator
will
light
.
VOLUME.
,
,
,
,
,
,
,
,
Batteries for
the
unit
(not included)
Open the battery compartment and insert
six batteries, type R-14, UM-2 or C-cells,
(preferably Alkaline) with the correct polarity
as indicated by the + and - symbols
inside the compartment.
Batteries contains chemical substances, so
they should be disposed of properly.
Incorrect use of batteries can cause electrolyt
leakage and will corrode the compartment or
cause the batteries to burst. Therefore:
Do not mix battery types: e.g. alkaline with carbon Zinc. Only use batteries of the same
type for the set.
When inserting new batteries, do not try to mix old batteries with new ones.
Remove the batteries if the set is not be used for a long time.
3
.
To
switch
off
the
unit
,
press
the
power
button
to
off
.
RADIO/AUX/MP3/CD
PROGRAM METHOD
(1)Press the [PROGRAM] key at STOP mode, system will go to PROGRAM mode.
-The PRG icon and P01 will blink at 2Hz. This prompts the user to enter the first songs in the
program PLAY list.
(2)The user can select the desire tracks by using [NEXT], [BACK]
keys.
Once these keys are pressed, the Display will show the selected track.
(3)After select the desired track, press [PROGRAM] key again and it will be stored in the memory.
-A maximum 99 tracks can be programmed.
(4)If press the [STOP] key during the program mode, then the selected TRACKs will be
stored
in the memory and return to STOP mode (Continuous Play mode)
(5)If press the [PLAY] key during the program mode, it will start the program PLAY mode.
PLAY start from P01 Track
Erasing a program
You can erase the content of the memory by:
- While playing, press STOP button
twice
.
- Opening the CD door
- Select
the
other
mode
.
