DAB970
/ English Instruction Manual
13
AUX-IN
1. Plug the 3.5mm AUX cable (not included
) into the “AUDIO IN” jack at the back side of the
unit.
2. Press the
“ “ button repeatedly on the unit or press the “
AUDIO
” button on the remote
control
until “AUX IN” is displayed to select the AUX IN function.
3. Start the playback of your external device.
4.
Press the “
V +/-
“ button on the remote control or rotate the “
VOLUME
” knob on the unit to
adjust the desired volume.
SOUND QUALITY
Adjust Bass or Treble (My EQ)
1.
Press the “
USER
” button on the remote control.
2.
Then press the “
/-
“ or “
Bass +/-
“ buttons on the remote control to increase/
decrease the function.
Preset Equalizer
Press the “EQ” button on the remote control. Select the desired sound characteristics such as
Normal / Classic / Jazz / Pop / Rock /MY EQ with
the “ / ” buttons on the remote control and
press the
“
EQ
” button to confirm.
SLEEP TIMER
Activate the Sleep timer
To set the sleep timer press the
“
SLEEP
” button on the remote control repeatedly, it changes
the number of minutes shown on the display in this sequence:
OFF
15
30
45
60
90
Show the remaining sleep time
When the
“
SLEEP
” button on the remote control is pressed once, the remaining sleep time is
displayed. Wait for a second until the display returns to the original display.
Cancel the sleep timer
Press the
“
SLEEP
” button repeatedly on the remote control until “off” is displayed.
ALARM
The clock must be correctly set for the alarm to operate correctly.
1. Press the
“
TIMER
” button to enter the timer function.
2. Select
“Alarm 1” or “Alarm 2” with the “ / ” buttons and press “
OK
”.
3. Select and adjust the following points: Alarm On/Off, Frequency, Date/Time, Source,
Duration, Volume.
Enter each point by pressing the “
OK
” button.
Note: If Digital Radio or FM is selected as the alarm source, the next menu item is the selection
of the desired station.
