Soundcraft Vi4 Field Manual
How to Label the desk.
• Select Channel by pressing SOLO/SEL button
• Press the top section of the screen for the channel you
wish to label
• Press the button below CH LABEL this will bring up a on
screen keyboard
• Long Label refers to the name on screen (ten characters
max)
• Short Label refers to the name on the LCD scribble strip
(six characters max)
Routing
To route to MAIN LEFT & RIGHT
• Select Channel
• Press the bottom section of the screen (of the channel you
wish to route) to open the routing pop up
• Make sure MASTER LR is switched on if it is not press the
button below it.
Setting Gain / Phantom Power
• Select channel
• Press the top section of the screen (of the channel you
wish to route)
• Turn the encoder labeled GAIN to adjust the gain
• To turn Phantom Power on press the button below +48v
• In this window you can also set the HPF and LPF as well
as pairing channels
SEL Select Buttons
Selected Channel
Snapshot Recall
Master Fader
Encoder Mode
Copy & Paste
Menu Button
