Soundcore Icon+ A3123, User Manual, Page: 4 / 86

05 06
EN EN b. TWS Group Mode
With TWS (True Wireless Stereo) technology, you can pair your Soundcore Icon+ with
another Soundcore Icon+ to enjoy stereo sound with separate left and right channels.
2
”
2 ”
Enter TWS Group Bluetooth
pairing mode (upon powering
on)
2
”
Press and hold the Bluetooth button for 2 seconds
on the two Soundcore Icon+ speakers at the same
time.
TWS Group pairing mode Rapidly flashing white
Connect to a device (TWS
Group)
1.After entering TWS pairing mode, wait about 5 seconds
for the two Soundcore Icon+ speakers to automatically
connect wirelessly.
Steady blue (the second Soundcore Icon+ speaker)
2. Turn on Bluetooth connection on your media device
(mobile phone etc.) and tap to select “Soundcore Icon+”.
Connected to a device
Steady blue (both the first and second Soundcore
Icon+ speaker)
When turned on, Soundcore Icon+ will automatically connect to the last
connected device if available. If not, press the Bluetooth button to activate
pairing mode.
To pair a different device, press the Bluetooth button to re-enter pairing mode.
Then repeat the pairing steps.
To disconnect Soundcore Icon+ from your media device, press the Bluetooth
button on the unit or disconnect “Soundcore Icon+” on your device.
Having connection problems? Remove Soundcore Icon+ from your device’s
Bluetooth history and ensure it’s less than 3 feet away. Then try pairing again. To
get the best sound quality, make sure there is a clear line of sight between the
connected device and your speaker.
T
Controls
Bluetooth mode
Play / pause
× 1
Press
Next track
× 2
Press twice
Previous track
× 3
Press three times
Volume up / down Press