sound4 STREAM X Maintenance And Operation Instruction Manual Download Page 66

Page: 66 / 66

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel.: +359 56 710710, Fax: +359 56 836700

Email: [email protected], Web: www.sound4.com

- 66 -

PRODUCT REGISTRATION CARD

• All fields are required, or warranty registration is invalid and void

Your Company Name

Contact

Address Line 1

Address Line 2

City

State/Province

ZIP/Postal Code

Country

E-mail

Phone

Fax

Which SOUND4 Ltd. product did you purchase?

Product Serial #

Purchase date / / Installation date / /

Your signature*

*Signing this warranty registration form you are stating that all the information provided to SOUND4 Ltd. are truth and correct.

SOUND4 Ltd. declines any responsibility for the provided information that could result in an immediate loss of warranty for the above

specified product(s).

Privacy statement: SOUND4 Ltd. will not share the personal information you provide on this card with any other parties.

Please print, complete and sign this Product Registration Card, and send to the following address:

Sound4 Ltd, 65, Al. Stamboliyski Str. 8000 Burgas, Bulgaria.

Or scan and e-mail to [email protected] to register your product.

Summary of Contents for STREAM X



































































Search results

Summary of Contents for STREAM X

Reviews:

Related manuals for STREAM X

Brands by name

Popular brands

sound4 STREAM X, Maintenance And Operation Instruction Manual

Search results

Summary of Contents for STREAM X

Reviews:

Related manuals for STREAM X

Brands by name

Popular brands