background image

GainStation 1

31

Dimensions (W x H x D): 

106 x 122 x 271 mm

Weight (w/o Lundahl transformer and AD converter): 

2.65 kg

The following accessory is optionally available:

•  Lundahl input transformer (upgrades after sale by authorized 

service personnel or SPL only)

•  24-Bit/96 kHz AD converter (Upgrading after sale can also be 

done by clients)

•  SPL GainBag (Transportation bag for GainStation 1, average-

sized microphone and cable)

•  19"/3U mounting frame for up to four GainStation 1

Information on Lundahl input transformers

Transformers have the characteristics usually associated with 
other analog components like tubes or coils–they sound 
„warmer“, fatter, punchier, more direct, improved presence 
without boosting the top end. 

One main reason for this is that transformers cancel out a large 
amount of odd harmonics (those portions of an audio signal 
that sound harsh to human ears).

The GainStation 1's input transformer delivers 7 dB of additional 
passive gain, which must be added to the printed values.

Technical specifications are subject to change without notice.

Dimensions/weight

Options

Summary of Contents for Gain Station 2272



































Reviews: