If this is your first time using the product, configure it per the instructions below.
1. Set the main power switch underneath the product to the on state.
Sliding it to the right (outward) turns the main power on.
2. Affix the included waterproof seal over the main power switch.
Ensure that the seal fully covers the main power switch.
3. Charge the product. To charge, you must use the included wireless charger.
- Ensure that the product is centered on the charger.
- Once the product is centered on the charger and begins charging, the battery
status (LED) light will turn on.
(You can use any charger that supports the Qi standard. )
Please refer to the instruction manual for details on how to operate.
Setup instructions
Read this first
Before first using the product, you must perform an initial setup.
Follow this document to power on the main power, apply the waterproof seal,
and charge the product.
Conduct these steps.
Only use the product after having read this document and the instruction
manual.
Bottom of
1. Slide the main power
switch
to the right (outward).
2. Affix the waterproof
seal over the main
power switch.
3. Battery status (LED)
