Sound Devices Kashmir MIXPRE-3 II Page 56 User Manual Download

Page: 56 / 84

User Guide

7. Tap SET.
8. When finished modifying the time and date, tap BACK or the Home icon to

exit the menu.

To select the time zone:

1. Tap the Menu icon.

2. Tap DATE/TIME > SET TIME > Time Zone.
3. Turn and press the encoder to select the proper GMT time zone for your

location. For instance, if in the U.S. in the Central Standard Time zone, the

proper setting would be GMT+6:00, according to the following chart.

4. Tap SET.

Using a USB Keyboard

A standard USB keyboard may be connected to the MixPre-3 and used to enter

metadata, such as take name and notes.

To use a USB keyboard with the MixPre-3:

Connect the keyboard’s male USB A plug into the supplied USB A jack on

the left panel.

Keyboards with an embedded USB hub are not compatible. Apple brand keyboards

are not compatible. Additionally, some keyboards must be connected only after the

recorder is turned on.

Keyboard shortcuts are provided in the

Shortcuts

section of this guide.

DRAFT

Not For Publication

Summary of Contents for Kashmir MIXPRE-3 II





















































































Search results

Summary of Contents for Kashmir MIXPRE-3 II

Reviews:

Related manuals for Kashmir MIXPRE-3 II

Brands by name

Popular brands

Sound Devices Kashmir MIXPRE-3 II, User Manual

Search results

Summary of Contents for Kashmir MIXPRE-3 II

Reviews:

Related manuals for Kashmir MIXPRE-3 II

Brands by name

Popular brands