manualshive.com logo in svg

Sound Devices CL-12, User Manual

Share
Download
Sound Devices CL-12 User Manual Download Page 23

23

CL-12 LINEAR FADER CONTROLLER

Accessing the EQ Submenu

Several settings related to EQ—such as Q-factor, EQ routing, and so forth—may 

be configured via the EQ submenu.

To access the EQ submenu:

1.  Press MENU.

2.  Select CL-12 > EQ. The EQ submenu appears.

o

ption

D

escription

Q-Factor

Set to one of four values: 0.707, 1.0, 1.414, 2.0. This affects all EQ 

bands.
For more information, see 

Setting the Q-Factor

.

LF Freq

Values range from 60 Hz to 300 Hz. Default is 100 Hz. This may be 

adjusted individually for each channel.

HF Freq

Values range from 8 kHz to 16 kHz. Default is 10 kHz. This may be 

adjusted individually for each channel.
For more information, see 

Setting LF and HF Frequency Defaults

.

LF Filter Type

Set to either Peaking or Shelving. This may be adjusted individually 

for each channel.

HF Filter Type

Set to either Peaking or Shelving. This may be adjusted individually 

for each channel.
For more information, see 

Setting LF and HF Filter Types

.

EQ Routing

Set to either Pre-fade or Post-fade. This affects all input channels.
For more information, see 

Setting EQ Routing

.

Summary of Contents for CL-12






























Reviews:

No comments

Brands by name

Popular brands

Load more brands