Sound Devices 702 User Manual And Technical Information Download Page 68

Page: 68 / 78

702 User Guide and Technical Information

v. 2.67

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Front Panel Button Shortcuts

To speed navigation the 7-Series has numerous navigation “shortcuts”. For combinations, hold down

the first identified key and continue to hold while pressing the next keys.

Function

Key Sequence

Action

Record

Tone

Record and Tone

In the menu File: Marker Mode must be set to Markers Disabled. While

recording hold the REC button and press the tone button. Tone will be

active as long as the tone button is held.

Jam Menu

Menu and HDD

Enters the time code jam menu. (702T &744T Only)

Button Lock

Backlight and Tone

Press backlight then tone to lock all front panel buttons except for

Record, Stop and Play. FF and Rew are available in playback mode. Use

backlight and tone again to unlock the panel.

Input Mutes

Input

Hold down and press soft buttons to mute inputs

Input

Routing

Stop and Input

Hold Stop and press INPUT to cycle through input routing presets. Last

preset will open the input routing menu to the custom route selection

Phantom #1

Tone and Menu

Toggles input 1 phantom power. Phantom 1 & 2 are linked when Inputs

1 & 2 are linked.

Phantom #2

Tone and HDD

Toggles input 2 phantom power

Low-cut #1

Backlight and Menu

Toggles Input 1 high-pass filter. Low-cuts 1 & 2 are linked when Inputs 1

& 2 are linked.

Low-cut #2

Backlight and HDD

Toggles Input 2 high-pass filter

Connect

FireWire

Stop and HDD

Initiates FireWire connection to a computer.

Take Status

Menu

Stop and Backlight

Enters Take Status Menu. From this menu mark the last recorded take

as Circled or No Good.

False

Take

Stop and Rewind

Delete last take prompt.

Increase

Take

Stop and Fast Forward

Increments take number to be recorded for next file

Take

List

Stop and Play

Take list and take status identifying screen

Toggle

Drives

HDD

Hold HDD button down for 1 second to toggle between viewable drives.

LED Level

+ Rotary Switch

Backlight and Rotary Switch

Adjusts level of LED brightness.

Summary of Contents for 702















































































Search results

Summary of Contents for 702

Reviews:

Related manuals for 702

Brands by name

Popular brands

Sound Devices 702, User Manual And Technical Information

Search results

Summary of Contents for 702

Reviews:

Related manuals for 702

Brands by name

Popular brands