Sound Devices 702, User Manual And Technical Information

Page: 12 / 78

702 User Guide and Technical Information
10
v. 2.67 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
LCD Main Display Descriptions
1
8
7
6
5
4
2
3
9
1)
Battery Level Indicator
Shows the voltage level of either the re-
movable Li-ion battery or external pow-
er sources. External power overrides
battery power when present. Graphical
bar for relative level and numeric indica-
tor for precise voltage measurement.
2)
File Name Display
Shows the file name actively being re-
corded or played back. In playback-stop
mode, a flashing file name indicates that
the fast-forward and rewind buttons can
be used to step through files in the cur-
rent playback folder.
3)
Absolute Time (A-time) Display
Shows the elapsed time of the file be-
ing recorded or played back. Flashes
in playback pause mode. In this mode
the FF/REW keys will scrub through
an open audio file. This display can be
set to reverse or flash during recording.
Flashes in playback-pause mode. The
A-time and the 24-Hour Time Counter
display can be exchanged if a large 24-
Hour Time Counter display is needed.
4)
Time & Date Display
Alternating display between the set date
and time of the 702. This information is
written as the creation and modification
date for recorded sound files.
5)
Bit Depth Indicator
Shows the set record bit depth. In play-
back, shows the file bit depth.
6)
Sampling Rate Indicator
Shows the set record sampling rate. In
playback shows the file sampling rate.
7)
Headphone Source Display
Indicates the source for headphone out-
put. Sources and selection order are user
selectable in the Setup Menu.
8)
External Media Space Status
(space remaining/record ready)
Bar graph indicates amount of record
time remaining on external FireWire me-
dia. Numbers show time in hours and
minutes based on the presently selected
number of record tracks, sample fre-
quency, bit rate, and file type.
9)
CompactFlash Status
(space remaining/record ready)
Bar graph indicates amount of record
time remaining on the inserted Com-
pactFlash card. Time remaining is
shown in hours and minutes based on
the presently selected number of record
tracks, sampling rate, bit depth, and file
type.
For both media types, an asterisk in front of
the media indicates that it is selected for re-
cording. Highlighted volume indicates media
selected for record monitoring, playback or
file folder display.