User Guide
106
4. Name your Quick Setup file.
i
When saving to CF or SD cards, if a file with the entered name already exists, that
previous file will be overwritten by the new file you save.
5. Slide the A B/C switch to select OK and save your Quick Setup file.
All Quick Setup files are saved as XML files.
Copying Quick Setup Files
Quick Setup files saved on one memory card may be copied to another memory
card as an additional backup.
To copy files from one memory card to another:
1. Press the MENU button.
2. Turn and press the Headphone encoder to select FILE STORAGE > File List.
3. Select the memory card with the file you want to copy.
4. Select the SETTINGS folder on that card.
5. Select the Quick Setup XML file you want to copy.
6. Slide the A B/C switch to access OPTION.
7. Select the Copy File ... option. The name of this option will vary depending
on whether you are copying to a CF card or an SD card.
Deleting Quick Setup Files
Saving a new configuration to any of the internal (INT) locations will overwrite
the previously saved file. The same applies to files saved to CF or SD cards so
long as the file names match.
However, if you want to delete a file from a CF or SD card, you can do that
without replacing it with a file of the same name.
To delete a file from a memory card:
1. Press the MENU button.
2. Turn and press the Headphone encoder to select FILE STORAGE > File List.
Summary of Contents for 664
