Sound Devices 633 User Manual And Technical Information Download Page 64

Page: 64 / 84

Setup Menu

Power

The

Power

Setup Menu option displays the Power Screen as well as the following options.

Parameter Name

Description

Options

Ext DC Ref

Adjust the voltage range and Warning Voltage for the

external DC Voltage Indicator.

» 12V Ext DC

•  NiMH
•  Expanded NiMH
•  12V Lead Acid
•  14V Li-ion
•  Full Range

Ext DC Loss

What action to take when external power is removed

or external voltage drops below the set threshold.

» Switch Power Source

• Shutdown

Inputs

Parameter Name

Description

Options

Ch 1-2 Linking

Links channels 1 and 2 with or without Mid/Side

decoding.

» Unlinked

• 1-2
• 1-2M/S

Ch 5-6 Linking

Links channels 5 and 6 with or without Mid/Side

decoding.

» Unlinked

• 5-6
• 5-6M/S

Phantom Voltage

Globally adjust voltage level of phantom power (on all

inputs which have phantom power enabled).

» 48V

• 12V

PFL Toggle Mode

Change the behavior of Input Select Switches. (

See

“PFL Toggle Mode”, page 25

)

» 6ch

• 3ch

Input to ISO Routing

Displays a sub-menu where inputs 1 through 6 can be

set to route to their respective ISO track pre- or post-

fader, independently.

» Prefade

• Postfade

Input Delays

Displays a sub-menu where inputs 1 through 6 can be

delayed, independently.

• 0.0 to 30.0 ms

(0.1 ms increment)

» 0.0 ms

Outputs

Parameter Name

Description

Options

Linking

For the purposes of arming and level adjustment, link

tracks L and R, and/or X1 and X2.

• LR, X1X2

» LR, X1, X2

• L, R, X1X2
• L, R, X1, X2

XLR-L Out

Select the analog output level or engage AES3 digital

on the L XLR-3M output.

• Mic

» Line

• -10
• AES 1,2

XLR-R Out

Select the analog output level or engage AES3 digital

on the R XLR-3M output.

• Mic

» Line

• -10
• AES 3,4

633 User Guide and Technical Information

v. 1.02

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

tup Menu

Summary of Contents for 633





















































































Search results

Summary of Contents for 633

Reviews:

Sound Devices 633, User Manual And Technical Information, Page: 64 / 84

Search results

Summary of Contents for 633

Reviews: