Sound Devices 633 User Manual And Technical Information Download Page 50

Page: 50 / 84

• File Name

• Scene

• Take

• Length

• Start TC

• Trk 1 to Trk 16 (16 fields)

• Notes

Generating Sound Reports

A sound report can be generated for all the files in any folder on the 633. Sound reports are created

from the File List.

To generate a sound report:

Press and hold the Menu Button and then press the Headphone Encoder to access the Take

List.

Slide the Slate/Tone Switch to access the File List.

To create a sound report for the files at the root level of the CF or SD card, highlight the

desired card and skip to the next step. To create a sound report for one folder only, use the

Headphone Encoder to navigate to the folder and highlight it (do not go into the folder).

Slide the RTN / FAV Switch to access folder options for the highlighted folder.

Select the Create Sound Report option. A CSV file will be created in the selected folder.

Sound reports created for at the root level of the CF or SD card will be saved as

REPORT.CSV

in the root of that media. Sound Reports created in a subfolder will be named with the last six

characters of that folder followed by “

_REPORT.CSV

”.

Take Management

Take List

The Take List consists of recorded takes on all media. Takes are listed in the left column in the order

they were recorded, with the most recent take at the top. The right column displays details about the

highlighted take, including:

• TC: Start timecode value of the take.

• Card: What media the take resides on.

• Folder: The folder that the take resides in.

• Scene: The scene name of the take.

• Take: The take number of the take.

• Date: The date that the take was record-

ed.

• Notes: The notes metadata field.

To access the Take List press and hold the Menu Button, then press the Headphone Encoder. The

Take List can also be accessed from the Setup Menu option

FILE STORAGE > Take List

. The top take

in the Take List is displayed with orange text. This is a special entry that represents the next take to

be recorded. Editing the metadata of this entry will affect all subsequent recordings.

633 User Guide and Technical Information

v. 1.02

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

File Manag

ement

Summary of Contents for 633





















































































Search results

Summary of Contents for 633

Reviews:

Sound Devices 633, User Manual And Technical Information, Page: 50 / 84

Search results

Summary of Contents for 633

Reviews: