manualshive.com logo in svg

Sound Devices 633, User Manual And Technical Information, Page: 29 / 84

Share
Download
Sound Devices 633 User Manual And Technical Information Download Page 29

Headphone Source

Description

LR ST

Master Bus in stereo.

LR Mono

Master Bus summed mono to both ears.

L Mono

Left channel of Master Bus sent to both ears.

R Mono

Right channel of Master Bus sent to both ears.

LR M/S ST

Mid-Side Stereo - Master Bus decoded M/S stereo to headphones, this is not to be used if 

the inputs are already linked as an M/S pair. 

X1X2

Aux Bus in stereo.

HP Preset

HP Presets 1-10 are customizable Headphone Sources. 

See Headphone Presets

Presets can be removed from the Headphone Source selection menu from Setup Menu option 

SYSTEM > Headphone Preset List

.

Headphone Encoder Mode

The functions for selecting a Headphone Source and adjusting headphone gain can be switched by 

setting Setup Menu option 

SYSTEM > Headphone Encoder Mode

 to 

Preset/Vol

. When this mode is 

engaged, turning the Headphone Encoder from the Main Screen will select Headphone Sources. To 

adjust the headphone gain from the Main Screen, press the Headphone Encoder and then turn the 

Headphone Encoder to adjust headphone gain. Turning the Headphone Encoder will continue to 

adjust gain until 2 seconds have elapsed with no gain adjustment, at which point turning the Head-

phone Encoder will once again select Headphone Sources.

Custom Headphone Presets

Ten custom Headphone Sources are available. These headphone presets can be edited, named and 

saved. To edit a custom headphone preset:

1. 

From the Main Screen, press the Headphone Encoder to access the Headphone Source List.

2. 

Rotate the Headphone Encoder to highlight the desired preset.

3. 

Slide the Slate/Tone Switch to display the Headphone Preset Editing Screen. This screen is a 

routing screen, with the left and right headphone signal labeled with green text. Sources with 

a blue background are assigned to that channel of the headphones, and sources with a black 

background are not assigned to the headphone channel.

Highlighter

Assigned source

Unassigned source

HP Preset name

M/S decoding

Mono summing

Favorite preset

Headphone Monit

or

ing

633 User Guide and Technical Information

23

Summary of Contents for 633





















































































Reviews:

No comments