Sound Devices 633 User Manual And Technical Information Download Page 11

Page: 11 / 84

Quick Start Guide

This section provides a brief overview of basic 633 operation. The steps will demonstrate powering

the 633, connecting an analog audio source to an input, connecting headphones, setting up monitor-

ing, preparing media for recording, and making a recording. Refer to the rest of this user guide for

full details on all 633 features.

1) Connect Power

Connect at least one power source. For external powering, connect a DC powering source (not in-

cluded) to the DC connector on the Right Panel. For internal powering from AA batteries, unscrew the

battery cap (counter-clockwise), insert six AA NiMH batteries (not included) the battery tubes. Orient

the top three batteries with the positive (+) side facing in and the bottom three batteries with the nega-

tive (-) side facing in.

2) Power On the 633

Slide the Power Switch right. The LCD will briefly display a boot screen with the Sound Devices logo

and then the Main Screen will be displayed:

Quic

k S

tar

t Guide

633 User Guide and Technical Information

Summary of Contents for 633





















































































Search results

Summary of Contents for 633

Reviews:

Sound Devices 633, User Manual And Technical Information, Page: 11 / 84

Search results

Summary of Contents for 633

Reviews: