VELA 90-130/1-160/1 - Code: 3529.0084.01
Rev. 0
dated 19/07/2004
Arc. 43-I
PT
0704
PP
0704
MC
0704
Technical Assistance Service
Tel. (+39) 0445.595.111
3
1.
Introduction
1.1
Foreword
1.2
Warranty: terms and conditions
The machine is covered by warranty for a period of twelve months from the
date of delivery, the warranty being limited to parts with manufacturing
defects and excluding the motors and electrical system.
Furthermore, any parts damaged during transport, as a result of poor or
incorrect installation or maintenance or because of negligence or improper
use are not covered by the warranty.
The warranty is valid for the original purchaser only and does not, under any
circumstances, include the replacement of the machine. The warranty is
invalidated if the machine is tampered with or subject to alterations or
repairs by personnel not authorised by C.M. SOTTORIVA S.p.A..
The manufacturer is not liable for any injury to persons or animals or
damage to objects caused, either directly or indirectly, by machine
breakdowns or as a result of not being able to use the machine. Defective
parts are normally repaired or replaced on the customer's premises, with the
travel, board and lodging expenses for the personnel sent to effect the
repairs or replacements being charged to the customer. The travelling time
and hours worked by the personnel are also charged to the customer; the
hourly rate will be calculated in accordance with the Anima tables.
If, according to the unquestionable judgement of the engineers, the work
cannot be performed on the customer's premises, then the customer must
have the machine delivered free of carriage to C.M. SOTTORIVA S.p.A.
After the repairs have been effected free of charge, the customer must then
have the machine delivered back to his/her premises, carriage paid. If any
repair work is performed after the expiry of the aforementioned warranty
period, the customer will be charged for labour (in accordance with the
Anima table), travel and board and lodging expenses, the cost of the
replaced parts and any transportation costs for the replaced parts. The rates
will be calculated in accordance with the Anima table in the possession of
the engineering staff.
Caution!
Read the information in this publication thoroughly before setting
the machine to work and follow all the instructions carefully.
CONSERVE this manual and all its enclosures in an accessible place
known to all operators and routine maintenance staff the manual
must be kept in a dry place and, if possible, in an bag to protect it
from external agents such as dust, moisture, light, etc.
