© 2021 SOTECC GmbH. All rights reserved Rev. 1.3
Handbook/Installation instructions
Canopy flash
15
Fix the cable with the cable holder, install the
suppressor, mount the panel cover and check if
canopy-power interface and the counterpart align
to each other by closing the canopy carefully.
If the canopy-power interface and the counterpart
are not aligned to each other, it is possible to make
smaller adjustments on the canopy-power
interface. Loosen the two screws and relocate the
contact on the bracket. Larger deviations can only
be solved by relocating the whole canopy-power
interface on the canopy. (If this is unavoidable,
please notice us via [email protected])
When closing the canopy, the canopy-power interface and the counterpart must not
jam each other.
8.7
connectBOX
Install the connectBOX if possible close to the quick separation point or to the counterpart to have
access to the ports and fix it either with screws or with Velcro.
8.8
Video
A detailed video about the installation can be found here:
https://www.youtube.com/watch?v=yTdoDFpJMLg&feature=emb_title