service record
25
2.5.4 Leg support can be elevated with a
physiological turning point
Setting distance between footrest and seat plate
• (1)
Loosen both star knob screws
(A)
,
• move the footrest/s in the new position
• and retighten the star knob screws.
INFORMATION
The star knob screws allow a flexible setting (length com
-
pensation) for the lower leg length also when flipping the
leg supports up.
ATTENTION
After every change/setting made on the lower leg length,
the star knob screws must be screwed on tight.
For the following work:
• angle setting,
• stop angle,
• depth setting
please proceed as already described in
chapter 2.5.3
.
Both leg supports can be differently positioned, left or right,
free from one another.
Setting the width of the leg support
• (2)
Loosen the headless screws
(A)
,
• pull/push the leg support adapter
(B)
out of
the adapter
(C)
in the desired position
• and retighten the headless screws.
• To change the height, remove the leg support,
• move the screw
(D)
in the hole
(E)
• and retighten the screw
(D)
.
• Put the leg support back in the holder.
Setting thigh cushion
• (3)
To adjust the angle setting of the thigh cush-
ion loosen the screw
(A)
and/or this screw
(B)
,
• place the thigh cushion in the desired position
• and retighten the screw
(A)
and/or
(B)
.
• To adjust the holder
(C)
of the thigh cushion,
remove the screw
(B)
,
• place the holder
(C)
in the wanted hole,
• set the screw
(B)
back in
• and tighten it.
• To adjust the thigh cushion in the holder
(C)
loosen both screws
(D)
(the second is not visi-
ble here),
• move the thigh cushion in the desired position
• and retighten the screw
(D)
.
(A)
(A)
(B)
(E)
(D)
(C)
(B)
(C)
(D)
(D)
(A)
(1)
(2)
(3)
