user manual for sport and DLS frame
37
(2)
(3)
(4)
(E)
(1)
(A)
(B)
(D)
(C)
(C)
3.22 Outdoor Front End (push aid for outside)
ATTENTION
The push aid can only be attached if there is no
user sitting in the wheelchair.
ATTENTION
The push aid is designed for a max. speed of 8
km/h. A higher speed is not allowed.
ATTENTION
Going downhill and driving with a tilted seat, it is
important to be extra careful.
(1-4) Mounting the pushing aid
• Close the wheelchair’s wheel locks.
• Tip the wheelchair slightly back and/or place
the casters on the jack up aid
(A)
.
• Lock the latches
(B)
left and right in an
opened position (pull out and turn 90°),
• insert both bars
(C)
on both sides all the way
into the adaption
(D)
.
• Close the latches again, (the latches
(B)
need to snap into place on the left and right),
• Remove jack up aid.
ATTENTION
After mounting, be sure to check whether the
construction is firm and secure in the fixture and
that it is locked safely.
Removing the push aid
To remove, proceed in reverse order.
(4) Widening the push aid
• Remove the screw joints
(E)
on both sides,
• place in desired width,
• replace all screws that may have been
removed and tighten the screw joints.
3.23 Baggage holder
ATTENTION
Fold the baggage holder back whenever possible to
avoid hurting someone.
ATTENTION
Load the baggage holder after you are seated in the
wheelchair.
