Jump beta
36
3.19 Thorax truss pads
(1)
Both kinds of thorax truss pads can open
and close. To do so, push the red button
(A)
and
simultaneously push the truss pad frame back or
forward. They snap into position when you release the
button
(A)
.
(2)
In order to fixate the individual frame members
(B)
or extension pieces in a certain position, tighten the
screw
(C)
on the joints with a suitable Allen wrench.
(2)
The position of the cushions can be adjusted or
fixated through the screws
(D)
.
3.20 Tipping lever
ATTENTION DANGER OF FLIPPING OVER
This maneuver should only be done by experienced
and strong accompanying people.
In order to pull a wheelchair driver in his/her
wheelchair over a ledge proceed as follows:
• if necessary, deactivate the ant-tipper,
• grab the wheelchair tightly on both push
handle or push bail,
• push on the tipping lever with one foot as
you
• CAREFULLY AND AT THE SAME TIME
tip
the wheelchair towards you and in this
pose pull it over the obstacle.
3.21 Cane holder
ATTENTION
Fixate your cane with the appropriate Velcro band
on the back of the wheelchair so that it doesn’t
accidentally get between the spokes.
3.17 Therapy table
The therapy table is placed in the holder under the
arm rests.
(1)
Guide both tubes
(A)
of the therapy table
simultaneously without tilting it (!) in the holders
(B)
fixate it then in the desired distance with the star
knob screw
(C)
.
3.18 Abduction wedge
The abduction wedge is mounted under the SeatFix.
The height can be adjusted in 1,5cm intervals, the
distance is infinitely variable.
Adjusting the height:
• Remove star knob screws
(A)
completely,
• shift the wedge with holder along the row of
holes
(B)
into the desired height,
• replace star knob screws
(A)
.
Adjusting the distance:
• loosen star knob screws slightly
(A)
,
• slide the wedge via the star knob back and
forth into the desired position,
• tighten star knob screws
(A)
.
(2)
(A)
(B)
(1)
(A)
(B)
(C)
(3)
(A)
(A)
