user manual for sport and DLS frame
35
3.16 Head rests
There are two versions of the head rest - with a
square-type tube
(2)
or a special section tube
(3)
.
Both kinds can be adjusted to the user in the same
way:
(2+3) Height adjustment:
• open the eccentric clamps (A)/star screw (A),
• adjust the desired height,
•
tighten screws/clamps (A) firmly.
Adjustment of distance:
• open clamp lever (B),
• adjust the desired distance,
•
tighten clamp lever firmly.
3.15.3 Back extension submersible
(1-3)
To extend and submerse the back extension
proceed as follows:
• remove the head cushion
(A)
,
• loosen the star knob screws
(B)
on both
sides,
• pull the back extension equally up,
• (Attention: do not tilt!)
• turn both star knob screws
(B)
tightly and
• fasten the head cushion
(A)
on the front
of the back extension with the available
Velcro bands.
ATTENTION
THE SUBMERSIBLE BACK EXTENSION IS NOT
SUITABLE AS A HEAD REST FOR TRANSPORTING IN
A VEHICLE!
(2)
(1)
(3)
(A)
(B)
(B)
(A)
(A)
(4)
(B)
(A)
(5)
(B)
(A)
