user manual for sport and DLS frame
31
3.12.3 Leg support detachable and swings to
the side
The leg support of the Jump beta can be swung to
the side and completely detached in order to, e.g.
accomplish activities of daily living.
INFORMATION
You should let your rehab technician set the height
and the angle as well as take care of the precision
work of each footrest.
Detaching the leg support
(1+2)
Unlock the leg support by pushing the lever
in
(A)
. After, turn the leg support 90° out. The leg
support can only be pulled out of the holding pipe
(B)
in this position.
Attaching the leg support
(3)
The leg support can only be attached in an
outward turned position. For this, guide the plug bolt
(A)
in the guide tube
(B)
. The locking mechanism
(C)
is guided on to the locking bolt
(D)
and locks in place
when you turn the leg support forward.
ATTENTION
The leg support is only operable when the locking
mechanism (C) locks in place in the locking
bolt (D). It then cannot swing to the side nor be
detached.
3.12.4 Leg support can be elevated
The leg support which can be elevated can – as
described in the previous part – also swing to
the side and be detached. Both systems can be
combined.
Detaching the leg support
(4)
Pull the leg support completely out of the guide
tube, turn it out and detach it (as described in the
previous part).
Attaching the leg support
(5+6)
With the leg support in an outward turned
position (90°), place it with the plug bolt
(A)
half way
in the guide tube
(B)
, turn it forward and then place
it all the way in to the guide tube. The locking slot
(C)
snaps in the bolt
(D)
and prevents that the leg
support turns to the side.
Setting the height
(4)
Loosen the clamp lever
(A)
, place the leg support
in the wanted position, retighten the clamp lever
(A)
.
(1)
(A)
(B)
(D)
(D)
(C)
(A)
(4)
(5)
(6)
(2)
(B)
(A)
(B)
(C)
(D)
(3)
