user manual for sport and DLS frame
27
3.7 Seat and back cover
(1)
For adjustable seat and/or back covers, the Velcro
parts
(A+B)
must always overlap a min. of 8 cm.
3.8 Firm seat plate (SeatFix) and curved back
plate
(2)
To
unlock
the firm seat plate (SeatFix):
• pull both levers
(A)
under the seat, inward
• and turn them 90°.
• The levers stay in this position.
To
lock
:
•
first place the seat plate on the front edge of
the seat tubes and
• push it by the back edge down until it snaps
into place.
• After, lock the SeatFix as described above.
(3)
To
unlock
the firm curved back plate:
• pull both locking levers
(A)
out
• and turn them 90°.
• The levers stay in this position.
• Pull the bolts
(B)
up out of the slots
(C)
.
(4)
To
lock
:
• First place the curved back plate with the
bottom bolt
(A)
on the slot
(B)
,
• then guide it down until the upper bolts
(C)
are also in the slot.
• After, lock the curved back plate as
described above.
ATTENTION
The wheelchair is only safe and usable with firmly
locked seat and/or back.
(1)
(A)
(B)
(A)
min. 8 cm
per side
min. 8 cm
per side
(3)
(B)
(C)
(4)
(C)
(B)
(A)
(2)