7
XG 310/330 Rev. 2
Operating Instructions
Putting into Operation
Caution:
Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
Scope of Supply
The supplied parts are indicated in the Hardware Quick Start Guide.
Mounting Instructions
The XG 310/330 appliances are designed for use in racks. Please consider the
following security tips:
Important Note:
Functional reliability outside of a rack cannot be guaranteed.
Warnings and Precautions
The appliance can be operated safely if you observe the following notes and the
notes on the appliance itself.
Rack Precautions
Ì
Ensure that the leveling jacks on the bottom of the rack are fully
extended to the floor with the full weight of the rack resting on them.
Ì
In single rack installation, stabilizers should be attached to the rack.
Ì
In multiple rack installations, the racks should be coupled together.
Ì
Always make sure the rack is stable before
extending a component from the rack.
Ì
You should extend only one component at a time—extending two or
more simultaneously may cause the rack to become unstable.
General Server Precautions
Ì
Review the electrical and general safety precautions that came
with the components you are adding to your appliance.
Ì
Determine the placement of each component in
the rack before you install the rails.
Ì
Install the heaviest server components on the
bottom of the rack first, and then work up.
Ì
Allow the hot plug hard drives and power supply
modules to cool before touching them.
Ì
Always keep the rack‘s front door, all panels and server components
closed when not servicing to maintain proper cooling.
