Scope of supply
Step 2:
Install the Power Adapter
Step 1:
Install the Rackmounting Kit Device
Holder to the Chassis
Step 3:
Mount the Power Adapter to the
Device Holder
In addition to the rack mounting kit contents, you will need
a long-handed Phillips-head screwdriver.
• 2 device holders
(left, right)
• 1 bevel
• 1 adapter bracket
• 6 flat head M3
screws
• 6 round head M3
screws
Place the adapter on the bracket. Draw attention to the
direction of the power outlet of the adapter. Secure the
position of the adapter with the supplied bevel by using
two round head screws from the scope of supply.
Attach the power adapter bracket either to the left or
right side of the rack mounting kit by using four round
head screws from the scope of supply.
United Kingdom Sales:
Tel: +44 (0)8447 671131
Email: [email protected]
North American Sales:
Toll Free: 1-866-866-2802
Email: [email protected]
Australia & New Zealand Sales
Tel: +61 2 9409 9100
Email: [email protected]
Boston, USA | Oxford, UK © Copyright 2014. Sophos Ltd. All rights reserved.
All trademarks are the property of their respective owners. 9.14.GH.simple
This Rackmount kit can only be used with SG 105/115 and SG 105w/115w appliances.
Rackmount Kit Mounting Instructions
SG 105/115
Secure the device holders to the appliance using three
flat head M3 screws from the scope of supply on both
sides.
The device holders must only be fixed to the appliance
by means of the supplied screws. Screws with other
dimensions might damage the appliance!
