Sony ZV-E10, Help Manual

Page: 70 / 577

Help Guide
Interchangeable Lens Digital Camera
ZV-E10
Focus Mode
Selects the focus method to suit the movement of the subject.
Menu item details
(Single-shot AF):
The product locks the focus once focusing is complete. Use this when the subject is motionless.
(Automatic AF):
[Single-shot AF] and [Continuous AF] are switched according to the movement of the subject. When the shutter button is
pressed halfway down, the product locks the focus when it determines that the subject is motionless, or continues to
focus when the subject is in motion. During continuous shooting, the product automatically shoots with Continuous AF
from the second shot.
(Continuous AF):
The product continues to focus while the shutter button is pressed and held halfway down. Use this when the subject is
in motion. In [Continuous AF] mode, there is no beep when the camera focuses.
(DMF):
You can make fine adjustments manually after performing auto focusing, letting you focus on a subject more quickly than
when using the manual focus from the beginning. This is convenient in situations such as macro shooting.
(Manual Focus):
Adjusts the focus manually. If you cannot focus on the intended subject using auto focus, use manual focus.
Focus indicator
(lit):
The subject is in focus and the focus is locked.
(flashing):
The subject is not in focus.
(lit):
The subject is in focus. The focus will be adjusted continuously according to the movements of the subject.
(lit):
Focusing is in progress.
Subjects on which it is difficult to focus using auto focus
Dark and distant subjects
Subjects with poor contrast
Subjects seen through glass
Fast-moving subjects
Reflective light or shiny surfaces
Flashing light
Back-lit subjects
Continuously repetitive patterns, such as the facades of buildings
Subjects in the focusing area with different focal distances
Hint
In [Continuous AF] mode, you can lock the focus by pressing and holding the button that has been assigned the [Focus Hold]
function.
When you set the focus to infinity in the manual focus mode or the direct manual focus mode, make sure that the focus is on a
sufficiently distant subject by checking the monitor.
MENU →
(Camera Settings1) → [Focus Mode] → desired setting.
1
70