Sony ZV-1F, Help Manual

Page: 117 / 298

Help Guide
Digital Camera
ZV-1F
AE lock
When the contrast between the subject and background is high, such as when shooting a backlit subject or a subject
near a window, meter the light at a spot where the subject appears to have the appropriate brightness and lock the
exposure before shooting. To reduce the brightness of the subject, meter the light at a spot brighter than the subject and
lock the exposure of the entire screen. To make the subject brighter, meter the light at a spot darker than the subject and
lock the exposure of the entire screen.
Hint
If you select the [AEL hold] function in [ Custom Key Setting] or [ Custom Key Setting], you can lock the exposure as long
as you are holding down the button. You cannot set the [AEL hold] function to [Left Button] or [Right Button].
Note
[ AEL hold] and [ AEL toggle] are not available when using zoom functions.
Related Topic
Assigning frequently used functions to buttons (Custom Key Setting) (still image/movie)
5-041-856-11(1) Copyright 2022 Sony Corporation
MENU → (Setup) → [Operation Customize] → [ Custom Key Setting] or [ Custom Key Setting] →
desired key, then assign [AEL toggle] to the key.
1
Adjust the focus on the spot at which the exposure is adjusted.
2
Press the button to which [AEL toggle] is assigned.
The exposure is locked, and (AE lock) is displayed.
3
Focus on the subject again and press the shutter button.
To cancel the exposure lock, press the button to which the [AEL toggle] function is assigned.
4
117