manualshive.com logo in svg

Sony ZRCT-300, Operating Instructions Manual

Share
Download
Sony ZRCT-300 Operating Instructions Manual Download Page 8

8

IN (cabinet input) connector (RJ-45)

Use a Category 7 cable (not supplied) to 
connect this connector to the OUT (cabinet 
output) connector on the preceding Display 
Cabinet in the daisy-chain connection.

For the first Display Cabinet in the daisy-chain 
connection, use a Category 7 cable (not 
supplied) to connect this connector to the 
OUTPUT connector on the Display Controller.

ZRCT-300 Display Controller

Front

 

 (power) switch

Turns the Display Controller on/off.

For details, see “Turning the Power On/
Off” (page 10).

MAINTENANCE connector (USB, Type A)

This connector is used for maintenance 
servicing.

Intake vent

Do not block the intake vent, as doing so will 
result in interior heat buildup which may 
result in fire or malfunction.

ERROR indicator

Blinks when warnings occur, and lights when 
errors occur.

For details, see “Troubleshooting” 
(page 22) and “Error Codes” (page 24).

STATUS indicator

Indicates the power status of the Display 
Cabinets.
The indicator lights green when all the 
Display Cabinets that are connected to the 
Display Controller according to the Display 
Cabinet layout settings are turned on.
If any of the Display Cabinets are turned off 
according to the Display Cabinet layout 
settings, the indicator turns off.

For details on the Display Cabinet layout 
settings, consult your system 
administrator.

POWER indicator

Indicates the power status of the Display 
Controller.

Indicator

Status

Off

The Display Controller is 
turned off.

Lit orange

The Display Controller is in 
standby mode.

Lit green

The Display Controller is 
turned on (normal operating 
status).

Blinking green

The Display Controller is 
starting up or shutting 
down.

Lit red

The forced standby mode 
has been entered.

For details, see “Entering the 
forced standby mode” 
(page 23) in the 

“

Troubleshooting.

”

Summary of Contents for ZRCT-300







































Reviews:

No comments

Brands by name

Popular brands

Load more brands