12
Storing station names
— Station Memo
You can assign a name to each radio station and
store it in memory. The name of the station
currently tuned in appears in the display. You can
assign a name using up to 8 characters for a
station.
1
Tune in a station whose name you
want to store.
2
Press
(LIST)
for 2 seconds.
3
Enter the characters.
1
Press the /– button to
select the desired character.
A
y
B
y
C
...
y
0
y
1
y
2
...
y
+
y
–
y
*
...
y
*
1
y
A
*1
(blank space)
2
Press
(SEL)
after locating the
desired character.
The next character flashes.
3
Repeat steps
1
and
2
to enter the
entire name.
4
To return to normal radio reception
mode, press
(LIST)
for 2 seconds.
Tip
Simply overwrite or enter “
” to correct or erase a
name.
Erasing the station name
1
Press
(LIST)
for 2 seconds.
2
Press
(DSPL)
for 2 seconds.
The stored names will appear.
3
Press the /– button
repeatedly to select the station name
you want to erase.
4
Press
(SEL)
for 2 seconds.
The name is erased.
Repeat steps 3 to 4 if you want to erase other
names.
5
Press
(LIST)
for 2 seconds.
The unit returns to normal radio reception
mode.
Note
If you have already erased all of the station names,
“NO DATA” appears in step 4.
Tuning in a station through a
list
— List-up
1
During radio reception, press
(LIST)
momentarily.
The frequency or the name assigned to the
current station appears in the display.
2
Press
(LIST)
repeatedly until you find
the desired station.
If no name is assigned to the selected station,
the frequency appears in the display.
3
Press either side of
(SEEK)
to tune in
the desired station.
