10
Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
By pressing buttons
(the SOURCE and MODE buttons)
Each time you press
(SOURCE)
, the
source changes as follows:
TUNER
n
CD
*
n
MD
*
n
TAPE
Pressing
(MODE)
changes the operation
in the following ways;
• Tape :
playback direction
• Tuner :
FM1
n
FM2
n
FM3
n
MW
n
SW1
n
SW2
• CD unit
*
: CD1
n
CD2
n
…
• MD unit
*
: MD1
n
MD2
n
…
*
If the corresponding optional equipment is
not connected, this item will not appear
(XR-C5200 only).
Tip
When the POWER SELECT switch is set to position
B
, you can turn on this unit by pressing
(SOURCE)
on the rotary commander.
By rotating the control
(the SEEK/AMS control)
Rotate the control and release it to:
•Locate the beginnings of tracks on the
tape. Rotate and hold the control
momentarily, then release it to fast-wind
the tape. To start playback while fast-
winding the tape, press
(MODE)
.
•Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback (XR-C5200 only).
•Tune in stations automatically. Rotate and
hold the control to find a specific station.
By pushing in and rotating the
control (the PRESET/DISC control)
Push in and rotate the control to:
•Receive the stations memorized on the
number buttons.
•Change the disc (XR-C5200 only).
Other operations
Rotate the VOL control to
adjust the volume.
Press
(ATT)
to
attenuate the
sound.
Press
(OFF)
to turn
off the unit.
OFF
(SOURCE)
(MODE)
Summary of Contents for XR-4900
Page 38: ...Sony Corporation ...
