42
Receiving calls
With the unit connected to the cellular phone,
you can receive a call in any status.
The following display indicates an incoming call,
along with the ringtone.
To answer the call
Touch .
To adjust the ringtone volume
Press
(VOL)
+/– while receiving a call.
The level of ringtone volume will be stored into
memory, independently from the regular volume
level.
To reject a call
Touch .
Note
The ringtone and talker’s voice are output only from
the front speakers.
Tips
•
You can set to answer a call automatically (page 47).
•
You can set to use the ringtone of the cellular phone
or this unit (page 47).
Operations during a call
The following display appears during a call.
To adjust the talker’s voice volume
Press
(VOL)
+/– during a call.
The level of the talker’s voice volume will be
stored into memory, independently from the
regular volume level.
To send DTMF (Dual Tone Multiple
Frequency) tones
Touch “Open Keypad,” then the required number
keys.
To transfer the current call to the
cellular phone
Touch “Handsfree OFF.”
To transfer back to the handsfree call, touch
“Handsfree ON.”
Note
Depending on the cellular phone, connection may be
cut off when call transfer is attempted.
To adjust the volume for the other
party
1
Touch “BT Menu.”
2
Touch
v
/
V
to scroll, then touch “MIC
Gain.”
3
Touch –/+ to adjust the level.
The level is adjustable in single steps,
between –2 and +2.
4
Touch “Back” repeatedly to return to
the previous displays.
To end a call
Touch .
ATT
Incoming call...
Incoming call...
Name
0123456789
ATT
On the Line.
10:59
Name
0123456789
Open Keypad
Handsfree OFF
Top
BT Menu
Navi
