Sony XM-N502, Service Manual

Page: 1 / 18

SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
XM-N502
SPECIFICATIONS
STEREO POWER AMPLIFIER
9-893-785-01
2013G33-1
©
2013.07
Canadian Model
AEP Model
UK Model
E Model
Ver. 1.0 2013.07
Circuit system OTL (output transformerless)
circuit
Pulse power supply
Inputs RCA pin jacks
Input level adjustment range
0.3 – 6 V (RCA pin jacks)
Outputs Speaker terminals
Speaker impedance
2 – 8
Ω
(stereo)
4 – 8
Ω
(when used as a bridging
amplifier)
Maximum output
Rated output
(supply voltage at 14.4 V, 20 Hz – 20 kHz, 1 % THD)
Frequency response
5 Hz – 50 kHz ( dB)
Harmonic distortion
0.05 % or less (at 1 kHz, 4
Ω
)
Low-pass filter 80 Hz, 18 dB/oct
Power requirements
12 V DC car battery
(negative ground)
Power supply voltage
10.5 – 16 V
at rated output: 15 A
(4
Ω
, 65 W × 2)
Remote input: 1 mA
Dimensions Approx. 271 × 55 × 185 mm
(w/h/d) not incl. projecting parts
and controls
Mass Approx. 1.5 kg not incl.
accessories
Supplied accessories
Mounting screws (4)
Protection cap (1)
Design and specifications are subject to change
without notice.
High level input connector
(E and Indian models only)
(E and Indian models only)
2.8 – 12 V (High level input)
High level input cord (1)
(E and Indian models only)
150 W × 2 (at 4
Ω
)
500 W (BTL, at 4
Ω
)
65 W × 2 (at 4
Ω
)
85 W × 2 (at 2
Ω
)
175 W (BTL, at 4
Ω
)
NOTES ON CHIP COMPONENT REPLACEMENT
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.