Design and Specifications subject to change without notice.
2003 SONY MOBILE
PRODUCT GUIDE
Other Specifications
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
200 watts minimum continuous average power into 4 ohms, 20 Hz to 300 Hz with no more than
0.2% total harmonic distortion per Car Audio Ad Hoc Committee Standards.
Circuit system
Class D Technology
Pulse power supply
Inputs
RCA pin jacks
High level input connector
Input level adjustment range
0.3 6.0 V (RCA pin jacks) 1.2 12.0 V (high level input)
Outputs
Speaker terminals, Through out pin jacks
Suitable speaker impedance
2 8
W
Maximum outputs
400 W (at 4
W
)
800 W (at 2
W
)
Rated outputs (supply voltage at 14.4 V)
200 W (20 Hz - 300 Hz, 0.2% THD, at 4
W
)
400 W (20 Hz - 300 Hz, 0.6% THD, at 2
W
)
Frequency response
5 Hz 300 Hz (+0.5 dB, -3 dB)
Harmonic distortion
0.06% or less (at 100 Hz, 4
W
)
Low-pass filter
50 - 300 Hz, 12 dB/oct
Low Boost
0 - 10 dB (40 Hz)
Power requirements
12 V DC car battery (negative ground)
Power supply voltage
10.5 16 V
Current drain
at rated output: 62 A (at 2
W
)
Remote input: 2 mA
Dimensions
Approx. 295 × 57 × 290 mm (11 5/8 × 2 1/4 × 11 1/2) (w/h/d)
not incl. projecting parts and controls
Mass
Approx. 2.8 kg (6 lb. 3 oz.) not incl. accessories
Supplied accessories
Mounting screws (5)
High level input cord (1)
Protection cap (1)
XM-D400P5
1 Channel Mono Amplifier
800W max power
200W x 1 RMS into 4
W
20Hz - 300Hz @0.2% THD
400W x 1 RMS into 2
W
20Hz - 300Hz @0.6% THD
Class D
Variable 50 - 300Hz 12dB/oct Low Pass Filter
40Hz EQ Boost
RCA and Speaker Level Inputs
