Sony XM-7527 X-Plod Specifications Download Page 1

26

2000 MOBILE ES PRODUCT GUIDE

Design and specifications subject to change without notice.

Specifications

Circuit System

Inputs

Outputs

Speaker Impedance
(*

Hi-current mode)

Rated Outputs 

(at 14.4 VDC, NFB on)

(Hi-Current /Hi-Voltage)

(Hi-Current)

Maximum Output
(Hi-Current /Hi-Voltage)

Frequency Response
Harmonic Distortion
Input Level Adjustment Range
High-Pass Filter
Low-Pass Filter
Low Boost & Cut
Power Requirements
Power Supply Voltage
Current Drain

Dimensions (w/h/d)
Weight
Supplied Accessories

Pure Direct Drive SEPP
Pulse Power Supply

RCA Pin Jacks

Speaker Terminals

0.5*-8 

(stereo)

1*-8 

(when used as bridging amplifier)

35.7/75 W x 2 (20-20,000 Hz, 0.04% THD, at 4 

)

75/150 W x 2 (20-20,000 Hz, 0.10% THD, at 2 

)

150/300 W x 1 (20-20,000 Hz, 0.10% THD, at 4 

)

150 W x 2 (20-20,000 Hz, 0.3% THD, at 1 

)

180 W x 2 (20-20,000 Hz, 0.3% THD, at 0.5 

)

300 W x 1 (20-20,000 Hz, 0.10% THD, at 2 

)

360 W x 1 (20-20,000 Hz, 0.3% THD, at 1 

)

90/180 W x 2 (at 4 ohms)
180/300 W x 2 (at 2 ohms)
360/600 W x 1 (at 4 ohms)

5 Hz-100 Hz (+0/-3 dB)
0.005% or less (at 1 kHz, 4 ohms)
0.2-4.0 V
50-200 Hz, -12 dB/oct 
50-200 Hz, -12 dB/oct
0-10dB (7-40Hz)
12 V DC Car Battery (negative ground)
10.5-16 V
At Rated Output: 23 A (4 ohms, Hi-Voltage), 58 A (4 ohms, Hi-Current); Remote Input: 1.6 mA

Approx. 321 x 84 x 287mm (315 w/cover)/(12 

5

/

8

x 3 

5

/

16

x 11 

1

/

4

in.) (12 

3

/

8

in. w/cover) 

Approx. 5 kg (11 lb.)
Mounting Screws (4), Terminal Protect Cover (1), 3mm Hex Wrench (1)

XM-7527

2/1 Channel Amplifier

• 0.5 ohm Drive Capability
• MOSFET Switching Power Supply
• Dual Mode Mono/Stereo
• 50-200 Hz LP Filter, 50-200 Hz HP Filter
• 7-40 Hz Low Frequency Boost/Cut 

• 75 W x 2 (4 ohm) at 0.04% THD (14.4 V)
• 150 W x 2 at 2 ohm (14.4 V)
• 300 W x 1 (4 ohm) (14.4V)
• Non-Negative Feedback Design
• High Current MOSFET Output Stage

Amplifiers

Reviews: