1
SERVICE MANUAL
US Model
Canadian Model
XM-5150GSX
STEREO POWER AMPLIFIER
Other Specifications
Circuit system
OTL (output transformerless) circuit
Pulse power supply
Inputs
RCA pin jacks
Outputs
Speaker terminals
Speaker impedance
2 – 8
Ω
(stereo)
4 – 8
Ω
(when used as a bridging amplifier)
Maximum outputs
80 watts
×
4 + 300 watts
×
1 (at 4
Ω
)
Rated outputs (supply voltage at 14.4 V)
5 Speakers:
40 watts
×
4 (50 Hz – 20 kHz, 0.04%
THD, at 4
Ω
) + 150 watts
×
1 (20 –
300 Hz, 0.04% THD, at 4
Ω
)
60 watts
×
4 (50 Hz – 20 kHz, 0.1%
THD, at 2
Ω
) + 180 watts
×
1 (20 –
300 Hz, 0.1% THD, at 2
Ω
)
3 Speakers:
120 watts
×
2 (50 Hz – 20 kHz, 0.1%
THD, at 4
Ω
) + 150 watts
×
1 (20 –
300 Hz, 0.04% THD, at 4
Ω
)
Frequency response
5 Hz – 50 kHz ( dB)
Harmonic distortion
0.005% or less (at 1 kHz, 4
Ω
)
Input level adjustment range
0.2 – 6.0 V (RCA pin jacks)
High-pass filter
50 – 300 Hz, –12 dB/oct
Low-pass filter
50 – 300 Hz, –12 dB/oct
Power requirements
12 V DC car battery
(negative ground)
Power supply voltage
10.5 – 16 V
Current drain
at rated output : 42 A
Remote input : 1.0 mA
Dimensions
Approx. 358
×
50
×
264 mm
(w/h/d) (14
1/8
×
2
×
10
1/2
in.) not incl.
projecting parts and controls
Mass
Approx. 3.5 kg (7 lb. 11 oz.) not incl. accessories
Supplied accessories
Mounting screws (4)
Design and specifications are subject to change without
notice.
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
40 watts/150 watts per channel minimum continuous average power into
4 ohms, 5channels driven from 50 Hz to 20 kHz/20 Hz to 300 Hz
(subwoofer) with no more than 0.04% total harmonic distortion per Car
Audio Ad Hoc Committee Standards.
+0
–3
9-873-437-01
2001L0400-1
© 2001. 12
Sony Corporation
e Vehicle Company
Published by Sony Engineering Corporation
