Design and Specifications subject to change without notice.
760W max power
150W x 2 into 4
W
, 20Hz-20kHz, @ 0.04% THD
380W x 1 into 4
W
, 20Hz-20kHz, @ 0.1% THD
190W x 2 into 2
W
, 20Hz-20kHz, @ 0.1% THD
Differential FET Input Stage
MOSFET Outputs
MOSFET Power Supply
Variable 50-300Hz Hi/Low Pass Filters
40Hz EQ Boost, RCA Output
RCA & Speaker Level Inputs
XM-2150GSX
2/1 Channel Amplifier
2002 SONY MOBILE
PRODUCT GUIDE
Other Specifications
Circuit system
OTL (output transformerless) circuit
Pulse power supply
Inputs
RCA pin jacks
High level input connector
Outputs
Speaker terminals
Through out pin jacks
Speaker impedance
2 8
W
(stereo)
4 8
W
(when used as a bridging amplifier)
Maximum outputs
300 W × 2 (at 4
W
)
760 W (monaural) at 4
W
Rated outputs (supply voltage at 14.4 V)
150 W × 2 (20 Hz 20 kHz, 0.04% THD, at 4
W
)
190 W × 2 (20 Hz 20 kHz, 0.1% THD, at 2
W
)
380 W (monaural) (20 Hz 20 kHz, 0.1% THD, at 4
W
)
Frequency response
5 Hz 100 kHz (+0.5dB, 3 dB)
Harmonic distortion
0.005% or less (at 1 kHz, 4
W
)
Input level adjustment range
0.2 6.0 V (RCA pin jacks)
0.4 12.0 V (High level input)
High-pass filter
50 300 Hz, 12 dB/oct
Low-pass filter
50 300 Hz, 12 dB/oct
Low boost
0 10 dB (40 Hz)
Power supply voltage
10.5 16 V
Current drain
at rated output : 40 A (at 4
W
)
Remote input : 2 mA
Dimensions
Approx. 14 1/8 × 2 1/4 × 10 1/2 in. (358 × 50 × 264 mm)
(w/h/d) not incl. projecting parts and controls
Mass
Approx. 3.5 kg (7 lb. 11 oz.) not incl. accessories
Supplied accessories
Mounting screws (4)
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
150 watts per channel minimum continuous average power into
4 ohms, both channels driven from 20 Hz to 20 kHz with no more
than 0.04% total harmonic distortion per Car Audio Ad Hoc
Committee standards
