HCD-XGR66/XGR600
US Model
HCD-XGR600
E Model
HCD-XGR66
COMPONENT Hi-Fi STEREO SYSTEM
— Continued on next page —
SPECIFICATIONS
• HCD-XGR66/XGR600 are the Amplifier,
CD player, tape deck and tuner in LBT-
XGR66/XGR600.
Ver 1.0 2003.03
9-877-213-01
2003C0200-1
© 2003.03
Model Name Using Similar Mechanism
HCD-XGR6/XGR60
CD
CD Mechanism Type
CDM37B-30BD60C
Section
Base Unit Name
BU-30BD60C
Optical Pick-up Name
A-MAX.3
TAPE
Model Name Using Similar Mechanism
NEW
Section
Tape Mechanism Type
CWM43RR23
SERVICE MANUAL
Sony Corporation
Home Audio Company
Published by Sony Engineering Corporation
PHOTO :HCD-XGR66
AUDIO POWER SPECIFICATIONS
(LBT-XGR600 USA model only)
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6 ohm loads, both channels driven, from 120 – 10,000 Hz: rated 160
watts per channel minimum RMS power, with no more than 10% total
harmonic distortion from 250 milliwatts to rated output.
Amplifier section
LBT-XGR600
Front speaker
Continuous RMS power output (reference):
175 + 175 watts (6 ohms at 1 kHz, 10% THD)
Total harmonic distortion less than 0.07% (6 ohms at 1 kHz, 80 W)
LBT-XGR66
The following measured at AC 120, 220, 230 – 240 V 50/60 Hz
DIN power output (rated): 220 + 220 watts (6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
250 + 250 watts (6 ohms at 1 kHz, 10% THD)
Inputs
PHONO IN (phono jacks):
sensitivity 3 mV, impedance 47 kilohms
MIC (phone jack):
sensitivity 1 mV, impedance 10 kilohms
GAME INPUT AUDIO L/R (phono jacks):
sensitivity 250 mV, impedance 47 kilohms
GAME INPUT VIDEO (phono jack):
1Vp-p, 75 ohms
MD (VIDEO) IN L/R (phono jacks):
sensitivity 450 mV (250 mV),
impedance 47 kilohms
Outputs
PHONES (stereo phone jack):
accepts headphones of 8 ohms or more
MD (VIDEO) OUT L/R (phono jacks):
voltage 250 mV, impedance 1 kilohms
VIDEO OUT (phono jack):
max. output level 1Vp-p,
load impedance 75 ohms
FRONT SPEAKER:
accepts impedance of 6 to 16 ohms
CD player section
System
Compact disc digital audio system
Laser
Semiconductor laser
(
λ
=795 nm)
Emission duration: continuous
Frequency response
2 Hz – 20 kHz (
±
0.5 dB)
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 90 dB
CD OPTICAL DIGITAL OUT
(square optical connector jack, rear panel)
Wavelength
660 nm
Output level
–18 dBm
